43221 Queen Elizabeth Sixth Form College

43221 Queen Elizabeth Sixth Form College

Tuesday, 16 November 2010

Shutter Speed

Shutter speed
During out first practical lesson, we took photographs as well as learning about shutter speed and how it affects the quality of our photos. Shutter speed controls the length of time that light can pass through the lens aperture to reach the film. In other words, it is the length of time the shutter is open. It may be easier to think of it as how long your camera ‘sees’ the image you’re trying to create.  Shutter speed is measured in seconds or in most cases, fractions of seconds, the bigger the number, the faster the speed, so 1/1000 is much faster than 1/30.
Slow shutter speed is used in low light while using a tripod to get a clearer picture. A slow shutter speed can be used to capture the movement in an image. This could be a flowing river or lights for example.
Fast shutter speed freezes the motion of a moving subject. Many cameras have a high shutter speed of 1/8000 seconds; however in most cases 1/400 is sufficient.

Bulb and time
These are the two options when choosing how to control your shutter speed.
·        Bulb allows the shutter to be open for as long as needed. The button is to be pressed to start and when the button is no longer being pressed, the shutter closes.
·        Time means that when a button is pressed, it opens the shutter and when you press it again is closes the shutter.

How to set the camera up
1.      Set the mode Dial to <Tv>.
2.      Set the desired shutter speed
·        While looking at the LCD panel, turn the dial.
·        It can be set in 1/3 stop increments.
3.      Focus on the Subject
·        Press the shutter button halfway. The aperture value is set automatically.
4.      Check the viewfinder display and shoot
·        As long as the aperture value is not blinking, the exposure will be correct.

No comments:

Post a Comment